|
Drywall
One of the most significant achievements of recent years in the field of construction materials, without a doubt, the emergence of dry. In homes, offices, apartments, cottages are elements from the gypsum-paper sheets (GFC). Drywall applies when finishing a virtually the entire premises: alignment of walls, Assembly suspended ceiling of any form of partitioning configurations, erection, creating niches, arches, закруглений, installation of prefabricated floors. Despite the seeming simplicity, drywall-oversized material from the pits of gypsum, reinforced glass, securely connected to the carcass of specially processed paperboard adhesive mass. Drywall produced a sort of revolution in building materials, surpassing the many of them on a range of grounds. That same countered by a mixture of gypsum and paperboard, coupled with the accessories (including profile plasterboard) traditional ways of dressing rooms?
First, environmentalism. Two main гипсокартонного sheet (GFC): natural gypsum and cellulose initially are absolutely clean components. Pulp in the cardboard for GFC, just like a plaster is safe for humans and animals, does not contain toxic substances. Natural Gypsum is acidity that human skin, so it is safe even for people suffering from allergies. Moreover, gypsum allows GFS "breathe": take or give any moisture in the air, regulating, thus, indoor premises.
Secondly, elasticity and strength. With the advent of dry outright ability of Interior Design. Because the drywall may take different forms and profile plasterboard can hold this design interior were able to receive the various kinds of arches, curvature, as well as other relieves intricately forms that suggests fantasy Designer. The GFC does not lose its properties when thickness in 8-24 mm (usually occurs drywall 9.5 mm and drywall 12.5 mm), is able to withstand up to 50 kg/m2.
Thirdly, the ease and speed of installation. Drywall 9.5 and drywall 12.5 (GFC) very easy, and, consequently, mobile installation and transportation. Save time and work decoration premises гипсокартоном is obvious: one person under force collect up to 50 square metres of gypsum-paper constructions, attached to the profile plasterboard for 6-8 hours! Gypsum GFC attached to the surface in two ways: either by using special glue or using steel profile plasterboard. This profile completely ready for installation, that also makes it easier to work with the GFC. Furthermore, immediately after the GFC mounted in a design surface is ready to finish decoration: glue paint products, ceramic tiles, painting. When installing the GFC is performed, plaster and other labour-intensive and dust processes.
Fourthly, special properties. The main component of dry-gypsum-originally combustible, this determines the bonfire of the final product-dry 9.5 and dry 12.5. Cardboard same bituminous material originally, but treated special nofire, fully meets the requirements of fire safety. Humidity dry enables special coating provides water absorption GFC from 25% to 10%, since neither the gypsum, no cardboard do not have the data properties. If you fit, graphically resistance used other GFC. The main difference from conventional fire dry consists in the fact that the production of advanced stoves gypsum. It should be noted that the woter GFC off with green chipboard while normal GFC gray and are mounted on standard profile plasterboard.
Fifthly, low cost dry 9.5 and dry 12.5. Cheap raw materials for the production of dry makes GFC available for wide layer of buyers, and low cost of mounting accessories (including profile plasterboard) allows trim for the same money much larger area GFC than its counterparts.
Sixthly, the wide range of applications. Currently drywall actively used in construction and decoration works. Thanks to the strength, flexibility, the availability of modifications, the possibility of applying GFC virtually limitless.
Standard thickness dry-12.5 mm. Drywall 12.5 mm discreet and applies to construction and repairs. In addition to dry 12.5 mm, a number of producers produces drywall 9.5 mm and 6 mm. Drywall 9.5/6 mm applies only when repairs and create decorative elements, such as the arch, multi-level ceilings colonnades, as well as when you fill in the gaps. In addition, there are high strength, drywall is 24 mm thickness, apply such GFC for enhanced durability material walls and floor.
If previously GFC used wooden sticks to create an armature construction, now increasingly popular becomes steel profile plasterboard. Steel Zn profile attaches designs from dry wall beads of sufficient strength to withstand significant load. Profile plasterboard is very simple installation that speeds up the process of installing GFC. Thanks to the flexibility of the profile as drywall, is able to accept the specified form that allows you to create secure designs from GFC varying forms. Profile plasterboard capable locally reinforcement superstructure, which are exposed to more load.
OOO "Pyramid" implements the wholesale and retail a wide range of building and finishing materials for different purposes. We offer drywall 9.5 and 12.5 mm from the best manufacturers. Also all necessary supplies for mounting GFC, including profile plasterboard at low prices.
|
